G-NS2400

Rob Versluis

Videos:

• https://youtu.be/CQr9Qk9wP6Y
• https://youtu.be/_5Vq3BvIsOI
• https://youtu.be/yaUHgewg0-U
• https://youtu.be/dHBCjLKw5k8
• https://youtu.be/UMwgwmSmOp8
• https://youtu.be/cyNDKGZoJ_c

This G locomotive is a free interpretation of the Dutch Railways series 2400 without any intention to create a 1:26 model of the original.
All the measuring of the original has been modified to fit the needs and possibilities of a locomotive in scale 1:26 on 1:32 track gauge.
The locomotive runs on a radius of minimal 90cm.

OpenSCAD designs.

• NS2400
• LGB compatible coupler with manual decoupler

R5 and R6 on the WIOpi-01 PCB should be shortened.

3 x 5mm white LED serial with 150Ω resistor.
Connector LHT1.

2 x 5mm red LED serial with 470Ω resistor.
Connector LHT1.

1 x 5mm blue LED 470Ω resistor, BS170.
I/O2 connector pin 7(GPIO16) to BS170 gate.
I/O2 connector pin 2(GND) to BS170 source.
The resistor ist connected to +12V(VPower).
Activated by attribute smokelight="true" in the wiopi.ini.
Function F7.

3 x WS2801 connected to SPI.

• Manufacturer: Modelcraft
• Type: RB350030-A0101R
• 12VDC 174rpm
• Interference suppression: 30V VDR

Example:

• Conrad

GT2 6mm

• Motor: 158mm
• Axes: 220mm

GT2 6mm

• Motor: 30, ø6mm axel
• Axes: 20, ø5mm axel, length=16mm

• Manufacturer: Innovations
• Type: ID-12LA
• PCB: GCA_RFID (V1)

Axes: ø5mm brass with M5 thread cutting.
Ball bearing: ø5mm 11x5mm
Wheel: LGB 67000-E299 37,5mm
Example:

• Modell-Land

M5-nut . washer . RGB wheel . washer .  Pulley 20 . washer . Pulley 20 . washer . RGB wheel . washer . M5-nut

Kantoflex Quadrat-U-Profil
1000 x 7,5 x 7,5 mm, Stärke: 1 mm, Aluminium, Blank, Grau, Prod.Nr. 10522007
Example:

• Bauhaus

2 x 42cm for the frame.
Distance between bogie centres is 26cm.
M3 screws an 2.5mm holes in the profiles for M3 threads.

LiFePO4 12V8 6Ah & BMS, 145 x 66 x 39 mm.
Example:

• Battery
• 4A Charger

In the tank there is a cutout for a XT60 mounting plug and a mini toggle switch.