WIO_Prog DCC 3.5 Amp central station with separated programming track output.

• GCA Hardware
  • GCA WIO
  • WIO First steps

This unit , commanded via Wifi, is using the same firmware of WIO_01.
It is a complete DCC central station with a maximum power of 3.5 Amp.
A second output for programming track adds an extra 1 Amp.

By simply making the right settings, WIO_Prog will behave as described:

• DCC Central station (I2C SSD1306 display connection is also available.)
• All complete CV programming facilities and read back on programming track.
  

• Programming on main (PoM) is possible. For PoM read the GCA214 is needed as global RailCom detector.
• Selectable voltage output for scales between N and 1
• Wifi connection with Rocrail
• Automatic stop of trains when Wifi is not stable or missing
• Supply with standard trafo possible.
• Excellent output accuracy.

Since this board is using same firmware as other WIO related units, the complete concept
is explained in one page. https://wiki.rocrail.net/doku.php?id=arduino:wio-en